Plastic Pipes & Fittings

P-R Type 3 Sanitary Pipes & Fitting

Usage area is the pressurized hot and water systems in buildings.

Manufactured from PP-R (Poly Prophylene Random Copolymer) resine which is resisant heat and pressure
Produced in SDR6 PN25, SDR7.4 PN 20 and SDR11 PN10 Pressure Classesi in net lengths of 4 meters.

The production range for the pipes is from 20 mm to 160 mm outside diameter and 20-110 mm outside diameter for the fittings.

Saves time and workmanship since the installation is easy with fusioterm welding technic.

All neccesary information about the installation is available in our detailed Technical Book.

The linear dilation Coefficient is 0 15 mm/mK


Waste Water Pipe and Fittings

Waste Water Pipes and Fittings with sealing ring and stable gasket is manufactured firstly and patented. The production complying with the standart of TS 275-1 EN 1329-1 are in two types, namely B and BD types.

Application Area:
Waste Water System for buildings (hot and cool). Ventilation Systems in the waste water systems for buildings. Down Pipes in Rain Gutter Systems.

B Type Waste Water Pipes and Fittings are used inside the buildings. BD Type Waste Water Pipes and Fittings are used inside the buildings and outside building installed on the wall or underground whitin 1 m distance from the buildings.

We also manufacture another type of PVC pipes with less wall thickness named “Type 2 “, which was included in the old standart.


Pvc Rain Gutter and Downpipes

100 mm Rain Gutter an Fittings are manufactured in conformity with TS EN 607 and their water flow capacity is 6,5 lt/m.

150 mm Rain Gutter an Fittings are manufactured in conformity with TS EN 607 and their water flow capacity is 12 lt/m.


Heatings Systems Pipes and Fittings

Products with EVOH oxygen barrier layer for a large number of radiant heating applications such as radiant floor heating, radiator systems and for boiler supply.